General Description
The children’s fingertip pulse oximeter features in small volume, low power consumption, convenient operation
and portability. it is only necessary for patient to put one finger into fingertip photoelectric sensor for diagnosis,
for patient to put one screen will directly show measured value of hemoglobinsaturation. it has been proved in
clinical experiments that it prossesses rather high precision and repeatability.
Detailed descriptions of product functions:
· Display Type: OLED display
· Sp02 Measurement range : 70% — 99% Accuracy: ±2% on the stage of 80% — 99%; ±3% on the stage of 70% — 79%; Below 70% no requirement Resolution: ±1%
· PR:Measurement range: 30BPM – 240BPM Accuracy:± BPM or ±t1%(the larger one)
· Pi index:measurement scope: 0-20 (optional) Power : reachargable lithium battery
· Power consumption: below 30mA
· Automatic power-off the product shuts off by it self when no finger is in the product ≥8 seconds
Dimension : 44mm x 26.5mm
Operation Environment:Operation Temprerature:5° — 40°
Storage Temperature:-l0° — 40°
Ambient Humidity: 15%-80% on operation
10% —80% in storage
Air Pressure : 70kPa – 106kPa
· Declaration:EMC of this product comply with IEC60601 1-2 standard.
· Measurement Performance in Low Perfusion Condition : required test equipment (BIO-TEK INDEX Pulse Oximeter tester) could measure the available pulse wave with the amplitude of 6% of the simulation pulse wave amplitude.
· Interference Resistance Capacity against Ambient Light : Device : works normally when BIO-TEK INDEX Pulse Oximeter tester exerts interfering signal test
